Tire Size Page

265/75R16 Tire Size

A 265/75R16 tire is approximately 31.65 inches tall, with a sidewall height of 7.82 inches and about 637.2 revolutions per mile.

TL;DR: 265/75R16 combines a 265 mm section width, a 75% aspect ratio, and a 16-inch wheel diameter.
Diameter
31.65 in
804 mm overall height
Sidewall
7.82 in
199 mm sidewall height
Circumference
99.43 in
2526 mm per rotation
Revs / Mile
637.2
396.0 revs per kilometer

265/75R16 Dimensions

MeasurementInchesMillimeters
Overall diameter31.65804
Sidewall height7.82199
Section width10.43265
Circumference99.432526
Wheel diameter16406
Revolutions per mile637.2

Prefilled Calculator for 265/75R16

Switch displayed result units without changing tire-size inputs.
Units

Related Tire Sizes

How to use this tire size page

This 265/75R16 page is meant to be a quick reference before you compare, shop, or change sizes. The first number, 265, is the section width in millimeters. The 75 is the aspect ratio, which means the sidewall height is 75% of the tire width. The R16 means the tire is built for a 16-inch wheel.

The most useful number for comparisons is usually overall diameter. Diameter affects how far the tire travels in one rotation, which is why it also affects circumference, revolutions per mile, and speedometer behavior. A size that is wider is not always much taller, and a size that looks close can still change the driving feel if the height changes.

Use the prefilled calculator on this page to test the size, then compare it against the tire size currently on your vehicle. Before buying, confirm the tire placard, load rating, speed rating, wheel width range, and available clearance. Tire dimensions are calculated from the size code, but real tires can vary slightly by brand, tread design, and construction.

What this size says at a glance

A 265/75R16 is a wider tire size often associated with trucks, SUVs, performance trims, or a stronger visual stance. The 75 aspect ratio gives it a very tall sidewall, so overall height, gearing feel, and body clearance should be checked carefully. Because it fits a 16-inch wheel, it falls into a very common wheel diameter range for cars, crossovers, SUVs, and light trucks.

Calculated from the size code, this tire is about 31.65 inches tall with a sidewall close to 7.82 inches. That sidewall number is useful because it hints at ride feel and wheel protection, while the overall diameter is the number that matters most when comparing speedometer behavior.

If you are considering 265/75R16 as a replacement, compare it against the tire currently installed on the vehicle rather than relying only on the printed width. A tire can gain width without gaining much height, or it can keep a similar width while changing diameter enough to affect road speed. The calculator above gives you the exact starting point for that decision.