255/40R13 Tire Size
A 255/40R13 tire is approximately 21.03 inches tall, with a sidewall height of 4.02 inches and about 958.9 revolutions per mile.
Quick facts
255/40R13 Dimensions
| Measurement | Inches | Millimeters |
|---|---|---|
| Overall diameter | 21.03 | 534 |
| Sidewall height | 4.02 | 102 |
| Section width | 10.04 | 255 |
| Circumference | 66.07 | 1678 |
| Wheel diameter | 13 | 330 |
| Revolutions per mile | 958.9 | — |
Prefilled Calculator for 255/40R13
Related Tire Sizes
Comparison Pages
How to use this tire size page
This 255/40R13 page is meant to be a quick reference before you compare, shop, or change sizes. The first number, 255, is the section width in millimeters. The 40 is the aspect ratio, which means the sidewall height is 40% of the tire width. The R13 means the tire is built for a 13-inch wheel.
The most useful number for comparisons is usually overall diameter. Diameter affects how far the tire travels in one rotation, which is why it also affects circumference, revolutions per mile, and speedometer behavior. A size that is wider is not always much taller, and a size that looks close can still change the driving feel if the height changes.
Use the prefilled calculator on this page to test the size, then compare it against the tire size currently on your vehicle. Before buying, confirm the tire placard, load rating, speed rating, wheel width range, and available clearance. Tire dimensions are calculated from the size code, but real tires can vary slightly by brand, tread design, and construction.
What this size says at a glance
A 255/40R13 is a wider tire size often associated with trucks, SUVs, performance trims, or a stronger visual stance. The 40 aspect ratio gives it a short sidewall, so ride firmness and wheel protection matter more than they would on a taller profile. Because it fits a 13-inch wheel, it falls into a smaller wheel diameter by modern standards, where tire availability and sidewall comfort are usually the main considerations.
Calculated from the size code, this tire is about 21.03 inches tall with a sidewall close to 4.02 inches. That sidewall number is useful because it hints at ride feel and wheel protection, while the overall diameter is the number that matters most when comparing speedometer behavior.
If you are considering 255/40R13 as a replacement, compare it against the tire currently installed on the vehicle rather than relying only on the printed width. A tire can gain width without gaining much height, or it can keep a similar width while changing diameter enough to affect road speed. The calculator above gives you the exact starting point for that decision.