Tire Size Page

245/55R18 Tire Size

A 245/55R18 tire is approximately 28.61 inches tall, with a sidewall height of 5.31 inches and about 704.9 revolutions per mile.

TL;DR: 245/55R18 combines a 245 mm section width, a 55% aspect ratio, and a 18-inch wheel diameter.

Quick facts

Diameter
28.61 in
727 mm overall height
Sidewall
5.31 in
135 mm sidewall height
Circumference
89.88 in
2283 mm per rotation
Revs / Mile
704.9
438.0 revs per kilometer

245/55R18 Dimensions

MeasurementInchesMillimeters
Overall diameter28.61727
Sidewall height5.31135
Section width9.65245
Circumference89.882283
Wheel diameter18457
Revolutions per mile704.9

Prefilled Calculator for 245/55R18

Switch displayed result units without changing tire-size inputs.
Units

Related Tire Sizes

Comparison Pages

How to use this tire size page

This 245/55R18 page is meant to be a quick reference before you compare, shop, or change sizes. The first number, 245, is the section width in millimeters. The 55 is the aspect ratio, which means the sidewall height is 55% of the tire width. The R18 means the tire is built for a 18-inch wheel.

The most useful number for comparisons is usually overall diameter. Diameter affects how far the tire travels in one rotation, which is why it also affects circumference, revolutions per mile, and speedometer behavior. A size that is wider is not always much taller, and a size that looks close can still change the driving feel if the height changes.

Use the prefilled calculator on this page to test the size, then compare it against the tire size currently on your vehicle. Before buying, confirm the tire placard, load rating, speed rating, wheel width range, and available clearance. Tire dimensions are calculated from the size code, but real tires can vary slightly by brand, tread design, and construction.

What this size says at a glance

A 245/55R18 is a wider tire size often associated with trucks, SUVs, performance trims, or a stronger visual stance. The 55 aspect ratio gives it a medium sidewall, which often balances steering response with acceptable ride comfort. Because it fits a 18-inch wheel, it falls into a very common wheel diameter range for cars, crossovers, SUVs, and light trucks.

Calculated from the size code, this tire is about 28.61 inches tall with a sidewall close to 5.31 inches. That sidewall number is useful because it hints at ride feel and wheel protection, while the overall diameter is the number that matters most when comparing speedometer behavior.

If you are considering 245/55R18 as a replacement, compare it against the tire currently installed on the vehicle rather than relying only on the printed width. A tire can gain width without gaining much height, or it can keep a similar width while changing diameter enough to affect road speed. The calculator above gives you the exact starting point for that decision.